Tap Bolts
tap-bolts
Usually of low carbon or grade 5 steel, tap bolts are used in a drilled and tapped hole that is threaded over its full length. Tap bolts are also used instead of a stud and a nut, to be screwed into some fixed part, rather than passing through the part and receiving a nut. 499.png
Usually of low carbon or grade 5 steel, tap bolts are used in a drilled and tapped hole that is threaded over its full length. Tap bolts are also used instead of a stud and a nut, to be screwed into some fixed part, rather than passing through the part and receiving a nut. 500.png
Usually of low carbon or grade 5 steel, tap bolts are used in a drilled and tapped hole that is threaded over its full length. Tap bolts are also used instead of a stud and a nut, to be screwed into some fixed part, rather than passing through the part and receiving a nut. 520.png
Usually of low carbon or grade 5 steel, tap bolts are used in a drilled and tapped hole that is threaded over its full length. Tap bolts are also used instead of a stud and a nut, to be screwed into some fixed part, rather than passing through the part and receiving a nut. 501.png
Usually of low carbon or grade 5 steel, tap bolts are used in a drilled and tapped hole that is threaded over its full length. Tap bolts are also used instead of a stud and a nut, to be screwed into some fixed part, rather than passing through the part and receiving a nut. 502.png
Usually of low carbon or grade 5 steel, tap bolts are used in a drilled and tapped hole that is threaded over its full length. Tap bolts are also used instead of a stud and a nut, to be screwed into some fixed part, rather than passing through the part and receiving a nut. 902.png
Usually of low carbon or grade 5 steel, tap bolts are used in a drilled and tapped hole that is threaded over its full length. Tap bolts are also used instead of a stud and a nut, to be screwed into some fixed part, rather than passing through the part and receiving a nut. 206.png
Usually of low carbon or grade 5 steel, tap bolts are used in a drilled and tapped hole that is threaded over its full length. Tap bolts are also used instead of a stud and a nut, to be screwed into some fixed part, rather than passing through the part and receiving a nut. 864.png
Usually of low carbon or grade 5 steel, tap bolts are used in a drilled and tapped hole that is threaded over its full length. Tap bolts are also used instead of a stud and a nut, to be screwed into some fixed part, rather than passing through the part and receiving a nut. 399.png
Tap Bolts, A307 Grade A Plain
(147) Tap bolts are usually hex head bolts threaded up to the head, with a machined point and a fully threaded shank.Usually of low carbon or grade 5 steel, tap bolts are used in a drilled and tapped hole that is threaded over its full length. Tap bolts are also used instead of a stud and a nut, to be screwed into some fixed part, rather than passing through the part and receiving a nut. 499.png
Tap Bolts, A307 Grade A Zinc
(237) Tap bolts are usually hex head bolts threaded up to the head, with a machined point and a fully threaded shank.Usually of low carbon or grade 5 steel, tap bolts are used in a drilled and tapped hole that is threaded over its full length. Tap bolts are also used instead of a stud and a nut, to be screwed into some fixed part, rather than passing through the part and receiving a nut. 500.png
Tap Bolts, A307 Grade A Galvanized
(27) Tap bolts are usually hex head bolts threaded up to the head, with a machined point and a fully threaded shank.Usually of low carbon or grade 5 steel, tap bolts are used in a drilled and tapped hole that is threaded over its full length. Tap bolts are also used instead of a stud and a nut, to be screwed into some fixed part, rather than passing through the part and receiving a nut. 520.png
Tap Bolts, Grade 5 Plain
(172) Tap bolts are usually hex head bolts threaded up to the head, with a machined point and a fully threaded shank.Usually of low carbon or grade 5 steel, tap bolts are used in a drilled and tapped hole that is threaded over its full length. Tap bolts are also used instead of a stud and a nut, to be screwed into some fixed part, rather than passing through the part and receiving a nut. 501.png
Tap Bolts, Grade 5 Zinc
(194) Tap bolts are usually hex head bolts threaded up to the head, with a machined point and a fully threaded shank.Usually of low carbon or grade 5 steel, tap bolts are used in a drilled and tapped hole that is threaded over its full length. Tap bolts are also used instead of a stud and a nut, to be screwed into some fixed part, rather than passing through the part and receiving a nut. 502.png
Tap Bolts, Grade 5 Zinc (USA)
(59) Tap bolts are usually hex head bolts threaded up to the head, with a machined point and a fully threaded shank.Usually of low carbon or grade 5 steel, tap bolts are used in a drilled and tapped hole that is threaded over its full length. Tap bolts are also used instead of a stud and a nut, to be screwed into some fixed part, rather than passing through the part and receiving a nut. 902.png
Tap Bolts, Grade 5 Yellow Zinc
(5) Tap bolts are usually hex head bolts threaded up to the head, with a machined point and a fully threaded shank.Usually of low carbon or grade 5 steel, tap bolts are used in a drilled and tapped hole that is threaded over its full length. Tap bolts are also used instead of a stud and a nut, to be screwed into some fixed part, rather than passing through the part and receiving a nut. 206.png
Tap Bolts, 18-8 Stainless
(166) Tap bolts are usually hex head bolts threaded up to the head, with a machined point and a fully threaded shank.Usually of low carbon or grade 5 steel, tap bolts are used in a drilled and tapped hole that is threaded over its full length. Tap bolts are also used instead of a stud and a nut, to be screwed into some fixed part, rather than passing through the part and receiving a nut. 864.png
Tap Bolts, 316 Stainless
(96) Tap bolts are usually hex head bolts threaded up to the head, with a machined point and a fully threaded shank.Usually of low carbon or grade 5 steel, tap bolts are used in a drilled and tapped hole that is threaded over its full length. Tap bolts are also used instead of a stud and a nut, to be screwed into some fixed part, rather than passing through the part and receiving a nut. 399.png